WillCarney
Well-Known Member
- Joined
- May 13, 2009
- Messages
- 854
- Reaction score
- 0
I was just working on two saucers and I thought it was ironic so
I just had to share. The attached picture is a little dark (sorry).
Down in front is the smallest saucer I have done. "MMX Delta"
from Art Applewhite's web site at just two inches in diameter.
Behind it is "Mucho CINCO" which is the largest saucer I have
done or am working on to date. I wanted it to be over 4 feet in
diameter but in making the templates and cutting the patterns it
came out to just about 40 inches in diameter. This one will have
a lot of LED's for night flying L and M motors. I am still not sure
if this one will need a parachute.
William
I just had to share. The attached picture is a little dark (sorry).
Down in front is the smallest saucer I have done. "MMX Delta"
from Art Applewhite's web site at just two inches in diameter.
Behind it is "Mucho CINCO" which is the largest saucer I have
done or am working on to date. I wanted it to be over 4 feet in
diameter but in making the templates and cutting the patterns it
came out to just about 40 inches in diameter. This one will have
a lot of LED's for night flying L and M motors. I am still not sure
if this one will need a parachute.
William