Weekends
Well-Known Member
- Joined
- Oct 9, 2002
- Messages
- 134
- Reaction score
- 0
What is the rule of thumb for how thick a fin fillet should be? This is for a low power, balsa wood, outside fin fillet. Not using epoxy, just wood glue (white or yellow).
I was just putting the fillets on an Estes Skini Mini and the question popped in my head. I generally just use one or two applications (after smoothed out).
Thanks,
Weekends
I was just putting the fillets on an Estes Skini Mini and the question popped in my head. I generally just use one or two applications (after smoothed out).
Thanks,
Weekends