KurtH
Well-Known Member
- Joined
- Jul 11, 2010
- Messages
- 427
- Reaction score
- 5
I have built 4 AV bays with single altimeters, and I have always used the 120/220 switch mounted in a switch band.
I want to build a dual altimeter setup for safety on higher flights with bigger rockets using bigger motors. Two of those switches could get unsightly, and start to cause space issues with the back of the switches protruding into the bayI see some people stick a screwdriver through holes in the airframe to turn on altimeters. For those of you who do this, are these vent holes which are doubling as access for switches?
Thanks for any guidance on this.
I want to build a dual altimeter setup for safety on higher flights with bigger rockets using bigger motors. Two of those switches could get unsightly, and start to cause space issues with the back of the switches protruding into the bayI see some people stick a screwdriver through holes in the airframe to turn on altimeters. For those of you who do this, are these vent holes which are doubling as access for switches?
Thanks for any guidance on this.