Dragon Rocketry kit inventory.

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DragonRocketry

Well-Known Member
TRF Sponsor
Joined
Feb 8, 2021
Messages
1,547
Reaction score
2,457
First off, I would like to thank everyone that has supported me last year. Without your support I would not be able to do the items I do. THANK YOU!!!!!!!!

I know inventory has gotten low towards the end of the year and I am sorry. Work, family and expansion of my business has taken a big chunk out of my time. But now things are back to somewhat normal again and I am working on getting kits ready again. There have been a few kits that have been restocked, some have gone away and there are some new ones on the site. Checkout my site for what has changed.

rocketry sticker.png
 
Just want to say I really appreciate vendors who are open and honest about their current inventory levels and keep their web sites up to date like what you do. Plus I think 99% of everyone here realizes most vendors have a life so sometimes keeping everything in stock is a bear. Someday I'll buy a kit from Dragon. ;)
 
Back in stock is a kit I have not had for some time due to the decal file getting corrupt. Had some time to build a new file.

4" Photon Disruptor.

4 in photon_disruptorii.jpg
 
Dragon Rocketry has been excellent to work with in my limited experience with them. While I haven’t had the opportunity to build any of their kits, Scott produced several sets of custom fins. I had planned to cut these myself, but finally decided that a laser cut fin would be more consistent. Along the way in building my new design, I realized I needed to trim some weight. New components were needed, so another set of fins were required. I emailed Scott, he sent me a quote. I payed for his service and the fins waiting to be shipped the same day. That’s how both orders went. Phenomenal service. Great quality work. I plan to spend more money with them in the future. Thanks for all you do for the hobby, Dragon Rocketry. Can’t wait to see these new kits you have planned.
 
I really appreciate the upsized models. I bought a swat and a sentinel, both in 4", and the kit quality is excellent! These are my first high power builds, and I hope to fly them before everything shuts down for the growing season.
 
I still need to build my Wizard... but I don't know if I can resist buying another lol... probably something a little smaller this time around so it's not so expensive to launch but your 4" designs are so tempting it's almost not fair lol
 
I picked up the Dragon Rocketry Fatboy XL this past summer from Scott and was (and still am) impressed with the quality, fit and amount of parts included in the kit.
I decided to install an Aerotech 38mm motor retainer and placed an order with Scott. It arrived the next day. Thank you Scott. All I need now is to get some vinyl decals made up. Hope to launch this spring.
IMG_4075.jpeg
 
Last edited:
As a newcomer to your rockets but I haven’t pulled the trigger yet. I would love it if you added the motor mount size on the listing page so I can more easily find which rocket is LPR vs MID vs HPR. Also allow to filter on that. Right now I have to click on each rocket to figure that out.

I do not have a level 1 yet but that is my eventual goal but you have some rockets that would help on that journey before getting there.
 
As a newcomer to your rockets but I haven’t pulled the trigger yet. I would love it if you added the motor mount size on the listing page so I can more easily find which rocket is LPR vs MID vs HPR. Also allow to filter on that. Right now I have to click on each rocket to figure that out.

I do not have a level 1 yet but that is my eventual goal but you have some rockets that would help on that journey before getting there.
29mm

https://dragonrocketry.com/products/1-64-blue-bird-zero ->29mm motor mount

https://dragonrocketry.com/products/1-64-sandhawk ->29mm motor mount

https://dragonrocketry.com/products/2-26-dia-rim-24-tartar ->29mm motor mount

https://dragonrocketry.com/products/2-34-upscaled-ram-jet ->29mm motor mount

https://dragonrocketry.com/products/3-atom-smasher ->38mm central motor mount, 29mm pod motor mounts

https://dragonrocketry.com/products/3-broadsword ->29mm motor mount

https://dragonrocketry.com/products/3-laser-lance ->29mm motor mount

https://dragonrocketry.com/products/3-super-bertha ->29mm motor mount


https://dragonrocketry.com/products/4-the-joker ->29mm motor mount

https://dragonrocketry.com/products/tail-spike-29dd ->29mm motor mount

I used a script to scrape the info.... so it might not be 100% accurate, but this hopefully will help. Also, I was just searching on mmt size, so these may technically not be MPR. You should check with the sim if you can.
 
Last edited:
38mm


https://dragonrocketry.com/products/3-a-20-demon-upscale ->38mm motor mount


https://dragonrocketry.com/products/3-atom-smasher ->38mm central motor mount, 29mm pod motor mounts


https://dragonrocketry.com/products/3-wolverine ->38mm motor mount


https://dragonrocketry.com/products/4-at-3-sagger ->38mm motor mount


https://dragonrocketry.com/products/4-big-daddy ->38mm motor mount


https://dragonrocketry.com/products/4-big-dawg ->38mm motor mount


https://dragonrocketry.com/products/4-dragon-slayer-l1-kit ->38mm motor mount


https://dragonrocketry.com/products/4-fat-boy-xl ->38mm motor mount


https://dragonrocketry.com/products/4-fury-of-fire ->38mm motor mount


https://dragonrocketry.com/products/4-goblin ->38mm motor mount


https://dragonrocketry.com/products/4-hojo ->38mm motor mount


https://dragonrocketry.com/products/4-laser-x ->38mm motor mount


https://dragonrocketry.com/products/4-nike-apache ->38mm motor mount


https://dragonrocketry.com/products/4-nike-apache-2-stage ->38mm motor mount


https://dragonrocketry.com/products/4-nike-crayon ->38mm motor mount


https://dragonrocketry.com/products/4-nike-smoke ->38mm motor mount


https://dragonrocketry.com/products/4-ram-jet ->38mm motor mount


https://dragonrocketry.com/products/4-red-planet-transport-ldrs-42-edition-pre-order ->38mm motor mount


54mm

https://dragonrocketry.com/products/4-american-raven ->54mm motor mount

https://dragonrocketry.com/products/4-atomic-dragon ->54mm motor mount

https://dragonrocketry.com/products/4-citation-patriot ->54mm motor mount

https://dragonrocketry.com/products/4-dragon-tail ->54mm motor mount

https://dragonrocketry.com/products/4-drm-59-wizard ->54mm motor mount

https://dragonrocketry.com/products/4-guardian ->54mm motor mount

https://dragonrocketry.com/products/4-mk-109-stingray ->54mm motor mount

https://dragonrocketry.com/products/4-nuclear-fusion-ii ->54mm motor mount

https://dragonrocketry.com/products/4-photon-disruptor ->54mm motor mount

https://dragonrocketry.com/products/4-photon-probe ->54mm motor mount

https://dragonrocketry.com/products/4-starblazer-x20 ->54mm motor mount

https://dragonrocketry.com/products/4-subatomic ->54mm motor mount

https://dragonrocketry.com/products/4-super-bad-bertha ->54mm motor mount

https://dragonrocketry.com/products/4-super-solar-probe-xl ->54mm motor mount

https://dragonrocketry.com/products/4-tartar ->54mm motor mount

https://dragonrocketry.com/products/5-54-fat-boy-xxl ->54mm motor mount

https://dragonrocketry.com/products/copy-of-4-black-diamond-kit-limited-run-pre-order ->54mm motor mount

https://dragonrocketry.com/products/dragon-breath ->54mm motor mount

https://dragonrocketry.com/products/dragon-breath-2-stage ->54mm motor mount

https://dragonrocketry.com/products/dragon-sword ->54mm motor mount

https://dragonrocketry.com/products/raven-5 ->54mm motor mount


https://dragonrocketry.com/products/starlight-cruiser ->54mm motor mount
 
Last edited:
Thank you for that.

Since the owner was on the line I was just feature requesting something that would make it easier for maybe other people like me looking through the listings in the future.
 
Back in stock is a kit I have not had for some time due to the decal file getting corrupt. Had some time to build a new file.

4" Photon Disruptor.

View attachment 625107
Grew up with the '76 Estes catalog floating around my house, and the Photon Disruptor was always one of my favorites. Someday I'll build one in 3" or 4". Will probably scratch build mine with a DBRM or MDRM nosecone, but always love seeing someone else show some love to that classic rocket. The more Photon Disruptors out there, the merrier.
 
That is an old kit, back when I did everything with a chop saw, table saw, bandsaw and jigs. If you have any questions just send me an email.
 
Back
Top