ChrisAttebery
Well-Known Member
- Joined
- Feb 15, 2014
- Messages
- 2,454
- Reaction score
- 90
I'm on my second foray into HPR. I originally flew HPR from 1998-2002 and was TRA level 2 certified. I built a level 3 project, but I never attempted a certification flight. I did fly it twice on Aerotech L850s successfully. In the last year and a half I have recertified back to level 2 and flown several K and L motors achieving up to 1200mph and 24,626'. I feel it's finally time to get my level 3 certification.
I'm going to be building a Wildman Punisher 4. It will be mostly stock, but I have a couple pieces I want to machine. More on those soon. I'm going to try to take my time and enjoy this build so I'll work on it as I have time.
I started out by machining a pair of new centering rings with notches for the shock cord and PEM nuts for the rail buttons. The front centering rings were tacked into place with CA. I used 10g of Rocketpoxy on each side of the MMT to attach the shock cord to the MMT. I wrapped it will parchment paper and packing tape to help it penetrate into the kevlar.
I'm going to be building a Wildman Punisher 4. It will be mostly stock, but I have a couple pieces I want to machine. More on those soon. I'm going to try to take my time and enjoy this build so I'll work on it as I have time.
I started out by machining a pair of new centering rings with notches for the shock cord and PEM nuts for the rail buttons. The front centering rings were tacked into place with CA. I used 10g of Rocketpoxy on each side of the MMT to attach the shock cord to the MMT. I wrapped it will parchment paper and packing tape to help it penetrate into the kevlar.