dshmel
Well-Known Member
- Joined
- Mar 13, 2010
- Messages
- 1,252
- Reaction score
- 195
I have a Cesaroni L1720 White Thunder Reload Kit that I can bring to AirFest 29, which begins on 09/01/23. This is a 3 grain kit and includes all parts. Specifically:
Case liner (phenolic tube)
Nozzle
Forward insulator disk
P75-ORK (O-ring kit)
P75-TSI-KIT (smoke tracking grain/insulator & igniter kit)
3 Propellant grains
Instructions
I have included photos of all of the parts. You will notice a small propellant grain sliver that is about 0.1705" thick. I shaved this off of the front grain in order to fit an Aeotech 75mm case. I have never used an Aertotech case with a CTI reload kit so I may not have needed to make such a modification. The sliver is included. Since the kit has been modified it would be considered EX. Someone with experience using CTI will probably be able to use this motor. The last retail value that I could find was around $300. I would like to get $100 for it.
Case liner (phenolic tube)
Nozzle
Forward insulator disk
P75-ORK (O-ring kit)
P75-TSI-KIT (smoke tracking grain/insulator & igniter kit)
3 Propellant grains
Instructions
I have included photos of all of the parts. You will notice a small propellant grain sliver that is about 0.1705" thick. I shaved this off of the front grain in order to fit an Aeotech 75mm case. I have never used an Aertotech case with a CTI reload kit so I may not have needed to make such a modification. The sliver is included. Since the kit has been modified it would be considered EX. Someone with experience using CTI will probably be able to use this motor. The last retail value that I could find was around $300. I would like to get $100 for it.