Boyce Aerospace Awesome 1/46 Gemini Titan Kit is here!!!

[Flash]

• Recreate America's third manned space system with the Boyce Aerospace Hobbies 1/46th Scale Gemini Titan Builders Kit
• Once completed, the Gemini Titan Builders Kit measures 28 inches long with a diameter of 2.6 inches (BT-80) and weighs 10.3 oz
• This 1/46th scale model rocket features detailed cluster motor mount with rear tank bulkhead, engine truss work, turbo-pump detail and screw on engine bell motor retainers
• Motors - Twin 18 mm motor cluster
• Detailed interstage with visible first stage upper tank dome
• Bayonet catch between the first and second stage
• Second stage display motor detail
• Detailed three part Gemini capsule with transition
• Kit features 35 quality 3D-printed ABS parts
• Our Builders Kit uses 4 clip on clear laser cut fins for flight
• Finish your Gemini Titan with detailed 3-page full body wrap vinyl decals
• Recommended Engines:
  • 2 x Quest Q-Jet C12-4 (Altitude - 335 feet)
  • 2 x Quest Q-Jet D16-6 (Altitude - 455 feet)
  • 2 x AeroTech single use D10-5 (Altitude - 769 feet)
• Additional items required to complete Builders Kit:
  2) 30" parachutes
  2) 18" BT-80 Body Tubes
  1) 18" BT-20 Body Tube
  2) 18" long shock cord (1/8" or 1/4")
  
• Step-by-step instructions included

The Boyce Aerospace Hobbies 1/46th Scale Gemini Titan Builders Kit recreates America's third manned space system. The Gemini Titan mated the two astronaut Gemini capsule with the larger Titan two stage booster. The Gemini Titan launch system was instrumental in America's race to a moon landing as we used it to learn orbital rendezvous, docking, space walking and the effects of long term space flight on humans. Our Gemini Titan model showcases incredibly detailed parts such as the cluster motor mount with rear tank bulkhead, engine truss work, turbo-pump detail and screw on engine bell motor retainers. This Builders Kit also includes a detailed interstage with visible first state upper tank dome. There is a bayonet catch between the first and second stage and the second stage boasts display model details. The Boyce Aerospace Gemini Titan Builders Kit is comprised of 35 high-quality 3D-printed parts and 4 clip on clear laser cut fins for flight. Your Builders kit requires additional parts, so be sure to check your included instructions for a full list. Give your model the finishing touch with impressive 3-page full body wrap vinyl decals.

Just $99.95

 

[Blast it Tom!]

Looks beautiful!

 

[Flash]

Agree, best scale model of Gemini Titan ever offered as far as I know.

Update from Boyce
2 x Estes Super C5-3
2 x Quest Q-Jet C12-4
2 x Quest Q-Jet D16-6
2 x AeroTech single use D10-5
(Altitude - 298 feet) (Altitude - 335 feet) (Altitude - 455 feet) (Altitude - 769 feet)

 

[Flash]

Some key thoughts about this kit.

The nozzles also serve as motor retainers, just put motors in and screw down nozzles to lock them in place.

Special snap on clear fins for flight, with lock tie backup. No more cutting slits in to main body tube or sliding a hard to glue plastic one over the main body tube.

Adjustable weight compartment in the Gemini Capsule itself.

Very little painting due to full body skin.

Very detailed Turbo pump assembly.

Closer to scale motor tubes as compared to a BT70 based kit.

Complete 2nd Stage assembly for display or show and tell.

Just a few of the really neat stuff in this kit.

Hope Alex follows it up with the Titan II icbm version or at least the icbm nose cone

I would say the very best kit by far to date!

 

[Flash]

Just found out that Boyce Aerospace has the BT80 Titan II nose cone for $29.95

 

[Flash]

Just found out that Boyce Aerospace has the BT80 Titan II nose cone for $29.95

 

[SCooke123]

Looks like a really good kit to build. I always liked this rocket.