APE - Punisher 4 Upgrades

[ChrisAttebery]

No, I haven't. I'm planning to put the altimeter as close to the body tube as possible. I was also planning to mount the altimeter right up against the bulkhead so the antenna would use the bulkhead as a ground plane.

 

[Pyropetepete]

I'll have to get the altimeter bay done to push you over the edge then.

🚀

Hahah yes indeed in watching closely.

 

[ChrisAttebery]

The altimeter bay is complete. I'm pricing them at $110 for a generic version and $120 for a full custom tray. This includes a pair of my machined bulkheads.

 

[CzTeacherMan]

The altimeter bay is complete. I'm pricing them at $110 for a generic version and $120 for a full custom tray. This includes a pair of my machined bulkheads.


View attachment 281265

Awesome... That comes with the band for the screw switches?

 

[ChrisAttebery]

Yes it does.

 

[ChrisAttebery]

Here's a rendering of the stock tray.

 

[patelldp]

Yes it does.

Just a heads up...you may want to add that bit of info to the red text at the bottom of your description. Up top you write:

"Our 4" machined altimeter bay system includes a pair of our machined aluminum bulkheads, a pair of machined aluminum tie rods, a blank 1/16" G10 altimeter tray and a fiberglass switch mounting band."

Down below (in red) you write:

"Includes two bulkheads, two quick release pins, two tie rods, one G10 altimeter tray and four 1.25" 10-32 screws."

 

[ChrisAttebery]

Good catch Dan. I'll update the description today.