Fore Check
Well-Known Member
- Joined
- Sep 24, 2010
- Messages
- 4,263
- Reaction score
- 9
This one is close to stock. The bt5080 centering rings are 1/8 ply from BMS (rather than cardboard) and I moved the thrust ring forward 1" in the stuffer tube and used an "E" engine hook. All else is stock stuff. TangoPapa made the decals.
RocSim estimates about 1100 ft. on an E9-6 compared to the 600 ft. or so on the D12-5. No nose weight added, with a sim'd stability caliber of almost 2 with the E engine.
I never even considered buying one of these as a kid, but it's really grown on me since I put the parts together and built it.
RocSim estimates about 1100 ft. on an E9-6 compared to the 600 ft. or so on the D12-5. No nose weight added, with a sim'd stability caliber of almost 2 with the E engine.
I never even considered buying one of these as a kid, but it's really grown on me since I put the parts together and built it.