- Joined
- Oct 25, 2016
- Messages
- 283
- Reaction score
- 175
Hello TRF,
I'm starting to design a couple of 3D printed AV sleds for my L3 project (Performer 150 from Performance Hobbies). I'm planning to use a Missileworks RRC3 as the primary altimeter and an Eggfinder Quantum for the backup. Both with be powered with (separate) 2S 1200mAh batteries. The nose cone is going to house an Eggfinder GPS tracker; with the same battery as the altimeters.
I have the hole patterns and dimensions for the electronics but prefer to have (at least a low fidelity) cad model that i can use to visualize the design prior to printing, hopefully reducing the number of cycles needed to get a usable design. Does anyone have a cad model of ant of the previously mentions electronics boards? Care to share? If not, I'l probably model it with combination of cubes and blocks, which I'd be happy to share if anyone else wants it.
Thanks.
I'm starting to design a couple of 3D printed AV sleds for my L3 project (Performer 150 from Performance Hobbies). I'm planning to use a Missileworks RRC3 as the primary altimeter and an Eggfinder Quantum for the backup. Both with be powered with (separate) 2S 1200mAh batteries. The nose cone is going to house an Eggfinder GPS tracker; with the same battery as the altimeters.
I have the hole patterns and dimensions for the electronics but prefer to have (at least a low fidelity) cad model that i can use to visualize the design prior to printing, hopefully reducing the number of cycles needed to get a usable design. Does anyone have a cad model of ant of the previously mentions electronics boards? Care to share? If not, I'l probably model it with combination of cubes and blocks, which I'd be happy to share if anyone else wants it.
Thanks.