Maybe better to stay with the paint you like and just change the color, unless you really want to match mine, which isn't necessary. Which DupliColor product line are we talking about?
Neil, I looked through all the paint product lines. They make a ton of stuff.Maybe better to stay with the paint you like and just change the color, unless you really want to match mine, which isn't necessary. Which DupliColor product line are we talking about?
I'm going a little crazy with this... when I look up the Duplicolor page I only see like 5 colors, all black/white/grey. Where is the color chart?The perfect match line is what I was looking at.
I'm going a little crazy with this... when I look up the Duplicolor page I only see like 5 colors, all black/white/grey. Where is the color chart?
I think I get what you're saying. Do you want the wings to be all silver, or should the transition line include them?Maybe 2 colors on the body tube. Aft end including fins silver grey. Nose cone and forward body Inferno red. Transition line would run diagonally from the forward edge of the top fin down to the belly at an angle about the same as the nose cone.
How does that look? If I do this I will need to cut about 1.5 inches of tube from the back of the pods so the ramjet doesnt hit the ground first.
More later....
Concur. Truncated tailcone would be better. A ramjet or spike at the tail end doesn’t make sense to me.Honestly I think it looks a bit weird with that cone at both ends. If you cut the spike off the rear piece you'd be left with something slightly more like a tail cone (although there's not much taper to it).
Enter your email address to join: