I wanted to share this with the community as I have been using this brand for about 12 years now and I REALLY like it and feel this is a great addition to your selection. I just finished a tip-to-tip lamination and thought I'd share my experiences with it as it's too good go unnoticed.
www.aeromarineproducts.com
The 300/21 system is the thinner epoxy.
The 400/21 system is the thicker epoxy.
Both Data sheets out perform other commonly used epoxy systems with Higher Shore Hardness, Tensile Strength, Shear Strength, Flexural Strength and slightly better heat tolerance at 250 degrees.
They mix 2:1 by volume.
I have done many layups in carbon, kevlar, fiberglass, laminating, using additives such as milled glass, chopped carbon, milled carbon, kevlar pulp, chopped kevlar and pigments. I also use this when injecting fillets for fins and centering rings, as general adhesive and sealing. I've used this in a previous racing hobby with excellent results and better performance than other commonly used epoxies.
Again, I just wanted to share this info as I feel it would be beneficial to the community to know that this exists and performs excellent.
https://www.aeromarineproducts.com/wp-content/uploads/2016/02/400-21-Hi-performance-1.pdf
https://www.aeromarineproducts.com/wp-content/uploads/2016/02/30021-tds.pdf
www.aeromarineproducts.com
The 300/21 system is the thinner epoxy.
The 400/21 system is the thicker epoxy.
Both Data sheets out perform other commonly used epoxy systems with Higher Shore Hardness, Tensile Strength, Shear Strength, Flexural Strength and slightly better heat tolerance at 250 degrees.
They mix 2:1 by volume.
I have done many layups in carbon, kevlar, fiberglass, laminating, using additives such as milled glass, chopped carbon, milled carbon, kevlar pulp, chopped kevlar and pigments. I also use this when injecting fillets for fins and centering rings, as general adhesive and sealing. I've used this in a previous racing hobby with excellent results and better performance than other commonly used epoxies.
Again, I just wanted to share this info as I feel it would be beneficial to the community to know that this exists and performs excellent.
https://www.aeromarineproducts.com/wp-content/uploads/2016/02/400-21-Hi-performance-1.pdf
https://www.aeromarineproducts.com/wp-content/uploads/2016/02/30021-tds.pdf
