jahall4
Well-Known Member
- Joined
- Jul 21, 2014
- Messages
- 1,245
- Reaction score
- 219
I'm not getting any response to this question over in Ground Support so I decided to post here too...
Sounds like Andrew is pretty busy these days so Im going to ask here if anyone else have received an Additive 38mm (or other size) flyaway rail guide the does not appear to quite close completely. Couple of things indicate this 1) there is just a tad more opening force then I would expect 2) the 4 rail guides dont quite line up. It appears that ridges in the print may have just enough thickness to account for the issue.
Anyone tried sanding the surfaces where they come together just enough to allow it to close all the way?
Sounds like Andrew is pretty busy these days so Im going to ask here if anyone else have received an Additive 38mm (or other size) flyaway rail guide the does not appear to quite close completely. Couple of things indicate this 1) there is just a tad more opening force then I would expect 2) the 4 rail guides dont quite line up. It appears that ridges in the print may have just enough thickness to account for the issue.
Anyone tried sanding the surfaces where they come together just enough to allow it to close all the way?