80/20 rail and accesories

[kramer714]

I just finished a consulting gig where part of my payment was keeping the parts from a test stand. The test stand was made of 80/20 rail. I listed the entire bill of materials from the 80/20 rail and parts, plus the McMaster part numbers. Everything is in good shape. The pivots are very handy for making adjustable supports or tilt for the rail. There is enough parts here for MANY pads.

Here is the complete list of parts that I have left over from the project, Total cost was over $650 for everything (not including tax or shipping). I would like to sell the ENTIRE lot for $400. If no one wants the full lot I will price out parting it out, please don't ask for parts yet. The parts are in Huntington Beach California. I can pack it up for shipping if someone wants to ship it.

Mike Kramer

BOM

47065T191 2 Each
Aluminum Inch T-slotted Framing System, 180 Deg Inline Pivot,sngl,4-hole,for 1" Extrusion

47065T142 6 Packs
Std Zinc-plated Stl End-feed Fastener, For 1", Aluminum Inch T-slotted Framing System

47065T147 1 Pack
Double End-feed Fastener, For 1", Aluminum Inch T-slotted Framing System

47065T11 2 Each
Aluminum Inch T-slotted Framing System, Two-slot Single Corner,1"solid Extrusion,6' Length

47065T194 2 Each
Aluminum Inch T-slotted Framing System, 180 Deg Perpendicular Pivot,single,4-hole,for 1"

47065T106 2 Each
Aluminum Inch T-slotted Framing System, Two-slot Single Corner,1"solid Extrusion,4' Length

47065T104 1 Each
Aluminum Inch T-slotted Framing System, Two-slot Single Corner,1"solid Extrusion,2' Length

47065T209 6 Each
Aluminum Inch T-slotted Framing System, Four-slot Single, 1" Solid Extrusion, 2' Length

47065T122 2 Each
Aluminum Inch T-slotted Framing System, Four-slot Single, 1" Solid Extrusion, 6' Length

47065T123 2 Each
Aluminum Inch T-slotted Framing System, Four-slot Single, 1" Solid Extrusion, 8' Length

47065T223 16 Each
Aluminum Inch T-slotted Framing System, 90 Degree Bracket,single,2-hole,for 1" Extrusion

47065T139 8 Packs
Compact Head End-feed Fastener, For 1", Aluminum Inch T-slotted Framing System

47065T223 8 Each
Aluminum Inch T-slotted Framing System, 90 Degree Bracket,single,2-hole,for 1" Extrusion

47065T139 4 Packs
Compact Head End-feed Fastener, For 1", Aluminum Inch T-slotted Framing System

47065T191 2 Each
Aluminum Inch T-slotted Framing System, 180 Deg Inline Pivot,sngl,4-hole,for 1" Extrusion

47065T209 2 Each
Aluminum Inch T-slotted Framing System, Four-slot Single, 1" Solid Extrusion, 2' Length

47065T169 8 Each
Aluminum Inch T-slotted Framing System, 90 Degree Bracket,double, 4-hole, For 1" Extrusion

47065T139 8 Packs
Compact Head End-feed Fastener, For 1", Aluminum Inch T-slotted Framing System

 

[kramer714]

I'm trying not to part it out in small pieces, anyone interested in buying HALF of the items for $200

Just feeling out interest

 

[kramer714]

1/2 sold!

Still have 1/2 for sale, this can make MANY pads and/or building jigs. $200 takes it!

 

[billspad]

1/2 sold!

Still have 1/2 for sale, this can make MANY pads and/or building jigs. $200 takes it!

How much would shipping to Massachusetts be?

 

[kramer714]

Shipping to Boston would be around $30 without the 8', $90 with the 8'rail

I would sell you everything (remember this is 1/2 of everything on the BOM) without the 8' piece for $215 shipped if you want to save the extra shipping for the long piece.

 

[billspad]

Shipping to Boston would be around $30 without the 8', $90 with the 8'rail

I would sell you everything (remember this is 1/2 of everything on the BOM) without the 8' piece for $215 shipped if you want to save the extra shipping for the long piece.

That's sounds good. The extra shipping for the 8' rail is actually more than the cost of the rail. I assume that's because of the 8' length and not the weight. Is it economical to cut the rail into a 6' and 2' piece? I'll take it without the 8' rail and if cutting it works out I'll take that too.

 

[kramer714]

pm sent

 

[kramer714]

SOLD!

Thanks Bill, it will hit fed-X (Ground) tomorrow,

Mike