• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

6" casting/liner tubes, 6" single-grain motor case

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

prfesser

LIFETIME SUPPORTER
TRF Supporter
Joined
May 7, 2017
Messages
3,809
Reaction score
5,721
Location
Murray, KY
I have one 39" convolute phenolic liner and four 12" long casting tubes. Liner is 5.39" od, 0.074" wall and is a loose fit in 6" aluminum pipe, will need several layers of kraft paper or something for a snug fit. Casting tubes 5.10" i.d., 0.074" wall, and a nice sliding fit inside the liner. The casting tubes are neither paper nor phenolic, they're some sort of flame-resistant material (Jim Mitchell had them custom-made, many years ago, and they've been sitting in my shop ever since he gave them to me). $50 for the set.

The motor case is 15.5" long, 5.49" i.d. with snap ring grooves; no closures or nozzle. I think it's been used twice. $40.

I will bring them to Southern Thunder, or will ship for actual shipping cost.

Best,
Terry
 
I'd potentially be interested in picking these up. Where would you be shipping from?
 
Back
Top