hornet driver
Well-Known Member
- Joined
- May 1, 2011
- Messages
- 4,639
- Reaction score
- 9
Well I've decided to do it. I drew up a rough set of plans last night--1/1 scale Length worked out to 36.5 in--span is right at 14 in and the widest part of the body is 5 in:y: If you like squat rocket this might be the one! I'll start in earnest after Black Friday. I laid a 29mm retainer down and a yardstick for scale. Final measurements were based on the tailcone being 2.5 in across. This left me enough room the recess the retainer and bury the lugs in the body. All other measurements were pulled from the initial tail cone and scaled up.----------in case you don't recognize it!