waywayanda
Well-Known Member
- Joined
- Feb 10, 2010
- Messages
- 119
- Reaction score
- 0
Dog House Rocketry has added a Drill Guide Tool to aid with drill holes into your body tube and center rings.
Over the past couple years we have had numerous requests on how to hand drill straight holes into center rings and how to fix holes that were drilled at angles that caused rail guides to not be aligned. We developed this simple to use tool to help drill straight holes. It also helps to keep drill bits from "walking" on tubes and flat stock. Guide is approx 5" long and it comes with steel guides/inserts for 1/8", 3/16", 1/4", 5/16" and 3/8" holes and an instruction sheet. We can also make custom steel guides for fractional and number drills - just contact us.
It works on 38mm coupler and larger body tubes. It will fit between the fins on 3-fin 38mm body tubes and 4-fin 54mm body tubes. It will not work on 29mm and smaller body tubes.
Any questions please ask.
And thanks to those who tested the prototypes.
Over the past couple years we have had numerous requests on how to hand drill straight holes into center rings and how to fix holes that were drilled at angles that caused rail guides to not be aligned. We developed this simple to use tool to help drill straight holes. It also helps to keep drill bits from "walking" on tubes and flat stock. Guide is approx 5" long and it comes with steel guides/inserts for 1/8", 3/16", 1/4", 5/16" and 3/8" holes and an instruction sheet. We can also make custom steel guides for fractional and number drills - just contact us.
It works on 38mm coupler and larger body tubes. It will fit between the fins on 3-fin 38mm body tubes and 4-fin 54mm body tubes. It will not work on 29mm and smaller body tubes.
Any questions please ask.
And thanks to those who tested the prototypes.