- Joined
- Jun 4, 2018
- Messages
- 1,296
- Reaction score
- 940
Got the external filets done with the some RocketPoxy.
Then started tested the tip to tip glassing on failed tube and scraps. Just kept it simple for this trail. First scuffed up the tube and the fin. Then mixed up some West epoxy and 204 hardener, and wetted the tube and fin. Laid down the small scrap of fiberglass cloth, and tapped it down lightly with a brush. Then wetted out the cloth again. Checked on it occasionally and wetted as needed.
Then started tested the tip to tip glassing on failed tube and scraps. Just kept it simple for this trail. First scuffed up the tube and the fin. Then mixed up some West epoxy and 204 hardener, and wetted the tube and fin. Laid down the small scrap of fiberglass cloth, and tapped it down lightly with a brush. Then wetted out the cloth again. Checked on it occasionally and wetted as needed.