- Joined
- Oct 2, 2013
- Messages
- 290
- Reaction score
- 5
Can any one validate my estimated Cp for a Wildman V-2 2.6" model.
Ok, I don't own a version of RockSim needed to model Boat Tail rockets. I do have it drawn up in OpenRocket, but I'm sure that is simple a waste of time.
So I went old fashion... I cut out an outline on some luan plywood.
Found the CG for the outline to be 13.8" from the tip.
Can someone confirm that the Cp for this rocket is very near my estimate of 13.8"?
THANKS!!!!
Ok, I don't own a version of RockSim needed to model Boat Tail rockets. I do have it drawn up in OpenRocket, but I'm sure that is simple a waste of time.
So I went old fashion... I cut out an outline on some luan plywood.
Found the CG for the outline to be 13.8" from the tip.
Can someone confirm that the Cp for this rocket is very near my estimate of 13.8"?
THANKS!!!!
Last edited: