Just have a couple more small sheets to add to the head and neck, then it's all done. I added the launch lugs and eyebolt, just need to add a shock cord and parachute. I balanced the rocket with a D12-3, and it came in just a little under 3" behind the break. So I tied a string 3" behind the break so the rocket could rotate in the yaw axis and took it outside for a swing test. I've never done a swing test before so I didn't know what to expect. Well after getting some speed and letting the line out a ways, the rocket stabilized with very little wiggle in the yaw axis! So, all is looking good for a test launch at my club launch on Saturday. I'm not sure if I'm going to be able to get to our August launch and was hoping to at least get a basic finish on the rocket before this weekend, but it doesn't look like that's going to happen. I could probably do it in Monokote by then, but having the time to make it happen might be tough. Besides, I don't really want to spend 40 dollars on covering just to find out the rocket doesn't fly. So, test launch naked first, then make it look pretty. Pretty pumped to see how it goes on Saturday.