- Joined
- Jul 28, 2015
- Messages
- 315
- Reaction score
- 750
I'm looking for feedback on the design for the attachment end of larger streamers and would appreciate input from the hive mind.
I'm playing with the idea of sewing some long nylon streamers that would be used in lieu of a drogue in a DD setup. This is my latest itteration of a possible design for a 4" wide streamer. The black is dacron fabric, stiff and normally used to reinforce corners on kites. One change I'm thinking of is to sew the 500 lb Kevlar into the end hem and then fold up the corners. The Kevlar would still come out at the point of the folds.
Thoughts? Thanks.
Steve
I'm playing with the idea of sewing some long nylon streamers that would be used in lieu of a drogue in a DD setup. This is my latest itteration of a possible design for a 4" wide streamer. The black is dacron fabric, stiff and normally used to reinforce corners on kites. One change I'm thinking of is to sew the 500 lb Kevlar into the end hem and then fold up the corners. The Kevlar would still come out at the point of the folds.
Thoughts? Thanks.
Steve