waffletea
APCP addict
Parametric 3d printed centering rings, and fin guides.
These have a how-to-use file attached.
Fin Guides: https://cad.onshape.com/documents/4...6186c7ee96815b0c25/e/b7c47cfea769149cd3071482
Fin Guides With Holes for threaded rods: https://cad.onshape.com/documents/f...8178f40e356829cecc/e/4e5c02140a0b838da4bd181c
Centering Rings https://cad.onshape.com/documents/6...renderMode=0&uiState=64bf0bb060601766cb7934c8
The centering rings have built in guides for your fins. Your fins should go in through the slots and go into the slots, so they will stay straight.
These have a how-to-use file attached.
Fin Guides: https://cad.onshape.com/documents/4...6186c7ee96815b0c25/e/b7c47cfea769149cd3071482
Fin Guides With Holes for threaded rods: https://cad.onshape.com/documents/f...8178f40e356829cecc/e/4e5c02140a0b838da4bd181c
Centering Rings https://cad.onshape.com/documents/6...renderMode=0&uiState=64bf0bb060601766cb7934c8
The centering rings have built in guides for your fins. Your fins should go in through the slots and go into the slots, so they will stay straight.