- Joined
- Nov 8, 2015
- Messages
- 1,401
- Reaction score
- 78
I finally decided to build the Madcow Torrent for my first level 1 attempt. I'm getting closer to completion and got the ebay wired up tonight. Thankfully the pin slot worked and it slid into place shutting off the PerfectFlight altimeter, after sealing the bay. (After gluing the aft bulkhead in place I finally test fit one more time and found I was WAY OFF from my hole, and I had TESTED that :bang:. (I put the sled in backwards...thank goodness )! When I turned it, the hole lined right up with the brass tube and switch. Thanks again to KenECoyote and rharshberger for answering questions and pointing me to the brass rods/tubes. Still got a ways to go, but it's sure fun again!
Sorry I cannot seem to rotate these. (btw, the tube isn't rotated properly with the kids picture. The pin isn't in line with the rail guides normally)
Sorry I cannot seem to rotate these. (btw, the tube isn't rotated properly with the kids picture. The pin isn't in line with the rail guides normally)