Mike Howie
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 802
- Reaction score
- 6
I also purchased the Leading Edge "Phantom" for the night launch. I like the
look of the fins. The model used basswood for the fins. Those points on the
end are sharp! I jabbed myself several times sanding them.
The flight on two C6-3 was good, and the recovery on the "spider web"
parachute was soft. No broken fin tips.
There are only two rows of LEDs on the Phantom, so I wouldn't want it to go
any higher than the two c's put it.
Post copied to gallery with permission
look of the fins. The model used basswood for the fins. Those points on the
end are sharp! I jabbed myself several times sanding them.
The flight on two C6-3 was good, and the recovery on the "spider web"
parachute was soft. No broken fin tips.
There are only two rows of LEDs on the Phantom, so I wouldn't want it to go
any higher than the two c's put it.
Post copied to gallery with permission
Last edited by a moderator: