Just getting back into this

[cat5752]

I'm just getting back in to rocketry after a 20+ year hiatus. I have 18, 24 and 29mm Aerotech RMS casings. Just standard stuff, nothing requiring Lvl 1. My local hobby shop changed owners and pretty much dropped all rocketry. I live in Eastern Oregon, so I really don't have anything close to me. I'm looking for the best source on line for reloads for my three engine sizes and would appreciate any links or advice that any one could give me. Thanks in advance,
Andy

 

[Jmhepworth]

In addition to my local vendor (Das Rockets https://dasrocket.com/), these are the ones I use:
https://www.csrocketry.com/
https://www.buyrocketmotors.com/
https://wildmanrocketry.com/

 

[cat5752]

In addition to my local vendor (Das Rockets https://dasrocket.com/), these are the ones I use:
https://www.csrocketry.com/
https://www.buyrocketmotors.com/
https://wildmanrocketry.com/

Thank you Joe!

 

[waltr]

Also BMS (Balsa Machining Service).
https://www.balsamachining.com/#

 

[cat5752]

Thank you very much, great link.

 

[Handeman]

https://www.hobbylinc.com/model-rocket-engines is also a good source for A - G motors and reloads.

 

[jhornsby3]

You say Eastern Oregon but didn't say where. With that, Mr. Grossfeld is outside of Bend. Usually has a full stock of reloads. Also carries kits and building supplies as well. You can find the launches he attends out at Brothers by looking at Oregon Rocketry's web site for the schedule.

I don't have his website link. I've known him for over 23 years and just call him when I need stuff.