Rocketeer Gator
Well-Known Member
- Joined
- Aug 12, 2010
- Messages
- 806
- Reaction score
- 3
I also posted this in my build thread but looking for any help I can get. The BTs are 6" dia. and the max the seam was, due to tubes not being perfectly square, was about a 1/16" on about a third of the seam.
NEED IDEAS!!
In the pic is the seam of the 2 BTs joined with a coupler,I had pressed spot putty/filler into the seam before sanding and painting.When I went to do more finishing work on the BTs I noticed the cracks.I sure don't want this to happen after the finish paint job is done.
Anyone have any idea how to keep this from happening?Would chipping all the filler out and maybe filling with an epoxy/fiber mix keep it from happening?