- Joined
- May 19, 2022
- Messages
- 25
- Reaction score
- 8
Hello. I am trying to wire up this Blue Raven and a little confused on how to connect 3 of the leads. I have attached the Blue Raven wiring diagram, my drawing of the current state and a picture of how this is setup in my electronics bay.
Specifically, my question is how/where to connect the 2nd lead from each e-match as well as the On or 2nd lead from the rotary switch. These are marked with question marks and numbers in my drawing.
I reckon the 2nd rotary switch lead terminates at the (+) on the far left of the alt but not sure how that and the other two leads from the e-matches come together - and in such a way that I can easily remove and replace spent e-matches.
Specifically, my question is how/where to connect the 2nd lead from each e-match as well as the On or 2nd lead from the rotary switch. These are marked with question marks and numbers in my drawing.
I reckon the 2nd rotary switch lead terminates at the (+) on the far left of the alt but not sure how that and the other two leads from the e-matches come together - and in such a way that I can easily remove and replace spent e-matches.