Rocketeer Gator
Well-Known Member
- Joined
- Aug 12, 2010
- Messages
- 806
- Reaction score
- 3
Why I waited so long to use this after it has been in my drawer of sand paper almost a year is beyond me.My brother bought it,used it once and gave it to me because it couldn't reach what he was trying to sand.
Well this morning I decided to give it a try on my 6" FWFG NC to rough up the inside to epoxy in the coupler.It worked like a charm!What normally took 10-15 minutes with with 80 grit now was reduced to maybe a minute if that with a 50 grit drum.This drum kit comes with 2 each 50,100,and 120 grit sanding drums.
I also found on the Gator Finishing site they also have a 3/4" version but I'm not sure Lowe's,where my 1.5" was originally purchased,carries it.
P.S. I used the drum on a 18v cordless drill at low speeds and the fact the product is named gator is purely a coincidence.
Well this morning I decided to give it a try on my 6" FWFG NC to rough up the inside to epoxy in the coupler.It worked like a charm!What normally took 10-15 minutes with with 80 grit now was reduced to maybe a minute if that with a 50 grit drum.This drum kit comes with 2 each 50,100,and 120 grit sanding drums.
I also found on the Gator Finishing site they also have a 3/4" version but I'm not sure Lowe's,where my 1.5" was originally purchased,carries it.
P.S. I used the drum on a 18v cordless drill at low speeds and the fact the product is named gator is purely a coincidence.