KurtH
Well-Known Member
- Joined
- Jul 11, 2010
- Messages
- 427
- Reaction score
- 5
In another thread I got some good guidance regarding my very tight fitting Aeropack adapter.
I have another question.
On the cardboard HPR rockets I have built, I extended the fin slot to the end of the tube, this way, I can remove the motor mount/fins before final assembly. This makes adding internal fillets much easier, since you have full access to the fin to MMT joint. Is there any reason not to do this?
Thanks
I have another question.
On the cardboard HPR rockets I have built, I extended the fin slot to the end of the tube, this way, I can remove the motor mount/fins before final assembly. This makes adding internal fillets much easier, since you have full access to the fin to MMT joint. Is there any reason not to do this?
Thanks