Faraday Cage and Rocket with Payload

[MrJuker]

Hi, we're working on a rocket with payload, and wanna check this rocket on computer during the rocket is flying (i mean check altitude, temperature, pressure etc). And i see this phenomenia "Faraday Cage" effect on electronic stuffs, radio frewuency and i remember we're using aluminum on rocket body tube. So i mean; is this faraday cage effecting our rocket and we can't collect the data if we using aluminum for body tube? Or this think is completely bulls**t?

 

[jderimig]

You will need to put an antenna outside of your tube. Is not bs.

 

[cerving]

Hi, we're working on a rocket with payload, and wanna check this rocket on computer during the rocket is flying (i mean check altitude, temperature, pressure etc). And i see this phenomenia "Faraday Cage" effect on electronic stuffs, radio frewuency and i remember we're using aluminum on rocket body tube. So i mean; is this faraday cage effecting our rocket and we can't collect the data if we using aluminum for body tube? Or this think is completely bulls**t?

Maybe you could make the entire rocket your antenna... that could be fun to design.

 

[MrJuker]

You will need to put an antenna outside of your tube. Is not bs.

so if i choose different material only partial tube (wherever electronic devices are) for this stuff, and choose Al for other parts (remaining body tube,fin,motor mount etc.), my problem will solved without antenna? i ask it cuz antenna is gonna be problem i think, apogee is about 5000ft and max speed .57 mach, is it break off with wind?

 

[jderimig]

so if i choose different material only partial tube (wherever electronic devices are) for this stuff, and choose Al for other parts (remaining body tube,fin,motor mount etc.), my problem will solved without antenna? i ask it cuz antenna is gonna be problem i think, apogee is about 5000ft and max speed .57 mach, is it break off with wind?

Yes you can make a section out of fiberglass and have your transmitting antenna there. Or hang a wire antenna out of a hole.

 

[UhClem]

Maybe you could make the entire rocket your antenna... that could be fun to design.

The dual of a dipole is the slot antenna.

 

[Steve Shannon]

Yes you can make a section out of fiberglass and have your transmitting antenna there. Or hang a wire antenna out of a hole.

Or make the entire rocket out of fiberglass.

 

[Burak]

[QUOTE = "Steve Shannon, gönderi: 1971529, üye: 8057"] Veya roketin tamamını fiberglastan yapın. [/ QUOTE]

+1 my desing idea same

 

[MrJuker]

[QUOTE = "Steve Shannon, gönderi: 1971529, üye: 8057"] Veya roketin tamamını fiberglastan yapın. [/ QUOTE]

+1 my desing idea same

Usta başlıktaki olayı duyduk ve tasarımı değiştirmeye karar verdik, bu konularda da ortalama bir bilgiye sahibiz, bu konuda tartışmak için sizinle irtibata geçme şansım var mı?

 

[MrJuker]

Or make the entire rocket out of fiberglass.

Wow, i wondering... Wanna try and see the differences on simulation. Once i should check the properties on CES Selector. Thanks for information

 

[Burak]

Usta başlıktaki olayı duyduk ve tasarımı değiştirmeye karar verdik, bu konularda da ortalama bir bilgiye sahibiz, bu konuda tartışmak için sizinle irtibata geçme şansım var mı?

Tabi ki.. Türk müsünüz?

 

[MrJuker]

Tabi ki.. Türk müsünüz?

Evet

 

[MrJuker]

Tabi ki.. Türk müsünüz?

instagram "ufuukoozdemir" usta bana mesaj atabilir misin?