- Joined
- May 31, 2011
- Messages
- 333
- Reaction score
- 132
This display stand was originally featured as a paper version found in the Estes model rocket Mini Brute Combo Javelin/Super Flea (kit# 0815) using 13mm mini-motors. You cut it out, glued or taped the tabs, and glued in a 13mm used rocket motor.
Now you have a 3D model of this display stand that you can download, print, and use to display all of your model rockets.
There are twelve files with three display versions in three different engine sizes.
1) 13mm post with a raised Estes logo
2) 13mm post with a recessed Estes logo
3) 13mm post with no logo, but with a recessed area.
4) 13mm Estes logo you can print and glue to the recessed area on the display stand.
5-8) 18mm display stand like the first four above.
9-12) 24mm display stand like the first four above.
https://www.thingiverse.com/thing:5340335
Now you have a 3D model of this display stand that you can download, print, and use to display all of your model rockets.
There are twelve files with three display versions in three different engine sizes.
1) 13mm post with a raised Estes logo
2) 13mm post with a recessed Estes logo
3) 13mm post with no logo, but with a recessed area.
4) 13mm Estes logo you can print and glue to the recessed area on the display stand.
5-8) 18mm display stand like the first four above.
9-12) 24mm display stand like the first four above.
https://www.thingiverse.com/thing:5340335