dcbertelsen
Well-Known Member
- Joined
- May 4, 2009
- Messages
- 421
- Reaction score
- 3
Up for grabs:
I'm in the process of getting a photo or two attached. For the most part, look at a stock photo; that is what you will get.
More items to be listed as I get them done including smaller CTI hardware; recovery bits for MPR up and other various things I have around.
- CTI 6G casing - flown once; a bit of residue remaining
- CTI 3G casing - brand new
- (2) 75mm spacers - brand new
- 75mm forward closure - brand new
- 75mm aft closure - brand new
- 75mm wrench
- BONUS Items:
- M3700 spacer - brand new
- Aeropack 75/98 Motor Adapter - used once
- Plastic sleeves for the casings
- 75mm forward seal disk for Aerotech compatability (not in photos)
I'm in the process of getting a photo or two attached. For the most part, look at a stock photo; that is what you will get.
More items to be listed as I get them done including smaller CTI hardware; recovery bits for MPR up and other various things I have around.
Last edited: