- Joined
- Aug 27, 2011
- Messages
- 11,629
- Reaction score
- 6,268
Do Over.... Gorilla Wood Glue = IndestructibleThis is 1/32 ply glued to 1/8 balsa.
Problem with watching football while building (at least Air Force won, games don’t get much closer or crazier than that!)
I don’t have a heat gun, can I bake this in the oven at 100 degrees centigrade to weaken the glue?View attachment 609604
No, the heat required to destroy polyurethane glue would almost certainly destroy the wood also. Plus the chemicals released by the decomposition of the glue might contaminate your oven. You might be able to salvage one wood piece by cutting the other piece away but at least one of the wood pieces will almost certainly be lost.This is 1/32 ply glued to 1/8 balsa.
Problem with watching football while building (at least Air Force won, games don’t get much closer or crazier than that!)
I don’t have a heat gun, can I bake this in the oven at 100 degrees centigrade to weaken the glue?View attachment 609604
This is 1/32 ply glued to 1/8 balsa.
Problem with watching football while building (at least Air Force won, games don’t get much closer or crazier than that!)
I don’t have a heat gun, can I bake this in the oven at 100 degrees centigrade to weaken the glue?View attachment 609604
Completely agree with you on material cost. It was also however at least an hour or two of time.It's 20 cents worth of material, chuck it and remake... have another $12 beer to wash down your chips...
I kind of feel like an old 7 Up commercial,
The “UnGlue Thread”!
Enter your email address to join: