bsrocketman
Member
- Joined
- Nov 3, 2015
- Messages
- 10
- Reaction score
- 0
After watching all the awesome onboard videos that have been posted, I've decided to join the crowd and get a Mobius camera. I know there are several ways and opinions on how to mount them, and other shrouds available. I felt like I wanted something a little different, so this is the design I came up with. The camera slides in from the bottom and is secured with a small cap and screws. The entire shroud can be mounted with glue, screws, or bolts along the centerline. I'm using short 6/32 bolts with blind nuts on the inside of the body tube. It makes for a quick way to transfer it between rockets.
**Edit** 4/27/2016 - Attached is the Openscad file. You will need to modify it to fit your particular rocket diameter.
View attachment MobiusShroud.zip
If you are interested in one of these, but don't have access to a 3D Printer, send me a PM.
**Edit** 4/27/2016 - Attached is the Openscad file. You will need to modify it to fit your particular rocket diameter.
View attachment MobiusShroud.zip
If you are interested in one of these, but don't have access to a 3D Printer, send me a PM.
Attachments
Last edited: