Here is an Aichi D3A2 VAL Dive Bomber rocket plane that will fly on two 24mm composite motors, probably F24-4s. Built out of a left over TLP 2.6" Kraft tube, a reject Apogee nose cone, range find 24mm tubes, scrap balsa blocks, label paper sheets, cardboard from the back of an artist pad for the centering ring, the nosecone from my Quest Tomahawk, some new parts from Hobby Lobby Estes kits and lots of LOVE. Lots of wood glue, CA, card stock and even some of the heavy 5 min epoxy glue were needed. I wanted the plane from TORA! TORA! TORA! the plane that sank the most Allied shipping, but this is not it. No, this is the A2 model with the spinner, bigger engine and cleaned up aerodynamics. This is the one that was the Turkey in The Great Marianas Turkey Shoot; this was an aircraft of the Devine Wind. Lots of nose weight, hot igniters and many prayers will be needed on this one. If she flies good then maybe some additional bombs on the wings, dive breaks arrester (engine) hook and more sculptured wheel fairings to make it look even more scale like.