Aerotech RMS ejection charge capacity

[-Slick-Ice]

Does anyone have a list of what the BP ejection charge capacities fit in the AT RMS cases? I have noticed the floating forward closure is significantly different than the standard closure but have not seen documentation for it. Aerotech never replied so this is what I have based on the ones I own.

29mm HP - 1g
29mm HP RAS - 2.5g
38mm - 1.5g
38mm RAS - 2.5g
54mm - ??
54mm RAS - 7g

Long story short I needed to buy the 38mm floating forward closure last year because the standard one is not enough for some of my larger rockets with large payload sections (4" IRIS). The 54mm standard I am guessing has way less but I don't own one. If I remember right the mid-power 29mm case was like .75g but I don't have one of those either.

 

[Andrew Brown]

The Aerotech 29 mm and 38 mm RMS reloads come with 1.4 g of powder, and generally fill up the standard forward closure when all is used. The 54 mm reloads come with 2.1 g and also fills the closure.

 

[tfish]

@-Slick-Ice

Have you learned how to use masking tape to add "side walls" to the Aerotech BP wells?
You literally could probably get them to hold 4-5 grams.

Back in the day even the 98mm motors were motor eject and came with tiny BP wells.


Tony