- Joined
- Jun 27, 2012
- Messages
- 5,439
- Reaction score
- 121
Not to be a party pooper.... but is there anyone who DOES like the EZ delays?
So far my flights have been fine. I like the RMS better but just for another reason with the forward closure.
Not to be a party pooper.... but is there anyone who DOES like the EZ delays?
The Butler did it.
Nice![video]https://youtu.be/i59Ds8rYM-U[/video]
Hmmmm a manufacturer with a bizarre sense of humor. Me likey.
Hi PeteSort out a proper UK EU supply.
Having had various talks, lies, story's and set backs I'd like the truth to posted publicly.
Your ass is beaten by CTI due to this in the UK EU.
Your 'EU' supply doesn't talk to anyone out side his country.
You supply directly to a country via the UK which technically you shouldn't due to the lack of any support for the UK.
Good luck
TARC teams will love more variety in the 24/60 casing, as will everyone else.
Especially with the 2016 TARC challenge.
And with CA AB-467 (which is now in the CA Senate as SB-467) they will be able to be Classified as Model Rocket Motors. Expected timetable is January 1, 2016. once the bill passes and is signed into law, we will know for sure.
Note that the 24/60 loads are packs of two...One load for the 24/60 case is what has been keeping me from purchasing. Also don't understand price difference, 24/60 F load costs $3.00 more than a 29-40/120 G load.
The Butler did it.
Note that the 24/60 loads are packs of two...
There may be some news coming out of Canada soon also. Not necessarily regarding the metal or FBJ propellant but some other progress.
It certainly is, and the 24/60 is one neat motor anyway. There are many kits out there that really fly well on it.My Bad, I would call that a good deal then! The vendor I first looked at did not have them listed as a 2 pack.
What are the plans for nozzle?
Yes, yes he did. At the Super Bowl, with the football.
I am very glad to hear this. Being able to build my delays is the reason I switched over to AT from CTI. Thanks for listening! Now about shipping all the new motors with the longest delays possible ..
One load for the 24/60 case is what has been keeping me from purchasing. Also don't understand price difference, 24/60 F load costs $3.00 more than a 29-40/120 G load.
N4800T clone, of course!
One wish to Aerotech:
Drop the "TRA-Level"-Requirement in Germany!
We have a German explosives permit which is very hard to get, the requirements are much higher than the simple TRA-Level 2 test, 2-3 days of theoretical and practical training, a practical launch test and a very hard written test with rocket calculations, law knowledge, security etc. We have a weight limit too, which is for 5 years, then the permit need to be renewed. There is also a screening before you are allowed to get the permit, if you have done something illegal before, you do not get the permit.
The TRA-Level system is basically a good thing, and we even would install a similar german level system to ensure that users are able to handle larger motors safely, although that is not needed by the German law.
The current system is hindering the rocket hobby in Germany due to the simple fact, that everyone who wants to buy Highpower-Motors needs to be a Tripoli/NAR-member, even if the law allows him to buy any motor with a CE mark.
That is expensive, younger flyers cannot afford that, as the legal permit is very expensive to get too and need to be renewed every 5 years..
For me, it did cost me 400 $ until now, for nothing, just to have a level-card. Many german flyers are upset about this, as they still need an insurance for Germany, they cannot use the TRA insurance in Germany.
The first manufacturer who sells motors according to the German law will gain a lot of customers, that's for sure
We all do a lot of work to get the legal permit, but still cannot buy motors without a tripoli/NAR membership! That is insane!
A belated Hi, New Guy (I was away from the computer for a while)
Well...here I go...Gary USED to post here a Lot. He listened to what we had to say. The plugged and threaded 38mm forward enclosure came from direct input from this forum. We lost that when a former employee aired his grievances here and Gary went away Former employee is a valued member of the rocket crowd, can't say anything bad about him at all but I miss talking to Gary.
Have a thick skin, someone will take potshots I'm sure...it ain't all wine and roses...I'd hate to lose another direct link to a major manufacturer again...
Can I make a real suggestion- stop announcing things on Facebook. I do not know many people who use it at all.
Enter your email address to join: