Tad
Well-Known Member
- Joined
- Aug 16, 2020
- Messages
- 80
- Reaction score
- 26
So, I'm building an L-Class 6 inch diameter rocket with 3 notched centering rings (aft, middle and forward) housing four 11 inch root chord trapezoidal fins and total rocket height of 94 inches. I've always used two rail buttons for my other rockets (4" & 3" diameters) but I'm not sure if I should still go with two rail buttons or possibly a third. Is there a rule of thumb here? If so, what should be my separation? I've got good anchor points at the aft and forward rings with 11 inch separation but would that be enough for a 6 x 94 inch rocket? Thanks in advance.
Tad
Tad
Last edited: