with the red cone and fin that looks even better in real life than the sim image. No one will notice glitches when you light it up and it screams off the pad.
Another touch up trick it to spray some paint into a small paper cup and use a qtip or fine modeling brush and touch up the paint. I had to do that in some spots on my Mercury Redstone fins. After touching up the black I would have to go back and touch up the white, then again with the black, it was exhausting. When I put down my first coat of white I realized I forgot to glue a launch lug on, so I had to sand down to bare tube in spots to glue them on. Then I got some terrible globs from the spray can and had to sand all that down and start over again. So, there's always that option, if you like sanding.