Two more flights from this weekend. Buddy Michaelson replaced a chute I had been having issues with with a new 5' and it worked perfectly out of their chute bag. Keith Packard checked out and repaired my easy mini after two hard landings two weeks ago which also worked perfectly. The lower fuse and shroud skin is getting a little wrinkled in places from landing on hard objects. Two of the fins developed cracks over time where it appears the CA glue crazed the surface(they are only 1/16" thickness) but I simply taped them with clear packing tape on both sides in two layers and they have held up fine in flight. I installed new dark grey silicone nonslip hydroflask slip on protectors held in place with a screw, rubber and steel washer that simulate the outboard nozzles, they are heat proof and just squish on landing and pop back into shape! It's still got the silicone R/C airplane muffler extension on the bottom which simulates the turbopump exhaust which also just bends on landing. All that is just cosmetic, It's got plenty of flying life left.