What happend to Performance Rocketry???

Does anyone know how to order from them? How do you see the pictures of some of the kits? It says that the page cannot be found.

What kit do you need a picture of ?

You can call or email us

Thanks
Curtis Turner
Performance Rocketry
814-536-8491
[email protected]
www.performancerocketry.com

The Concept 38. My email is [email protected]
Also, I would like specs.
Thanks!

Curtis

I'm still trying to pay you for that fincan. Please answer the phone...

Al

The Concept 38 looks kie the rest of the Concept Rockets, however it is not available for the time being.
We have had a problem with the mold and have not got it fixxed.

Thanks
Curtis Turner
Performance Rocketry
814-536-8491
[email protected]
www.performancerocketry.com

What about the 54? What are the rec. motors?

Steve

Want to fly a neat one? Try the 4"Nike Apache.

Al

Really? What are the rec. motors?

I know this guy that has a Concept 98 and he can't fit the 98mm motors in there because the BT are .004 of an inch to small.

Whatever you can squeeze in!

No kidding.
Goto your autoparts store and get a cylinder hone with an extension. Chuck it up in your drill and use it to open out the tube. If you are nervous about doing this - wrap the stones in a full sheet of sand paper and use the hone assembly just to apply pressure.

I've run into this myself.
Curtis has one 98mm mandrel that is a tad small.

I have also used a hone to clean out stubborn liners. Wrap the hone with a scubby pad soaked in vinegar or Isopropal and give it a whirl - clean as can be in no time flat! But that's a different thread!

Is it an Aerotech 98mm motor ?
or was it an EX Motor?

I do have 1 mandrel that is slightly smaller, i have since pulled it from use.

Have your friend give me a call and maybe i can work with him.
or let me know who it is and i can make a call.

Thanks
Curtis Turner
Performance Rocketry
814-536-8491
[email protected]
www.performancerocketry.com

Curtis,

Please check your email. I have been trying to get in touch with you.

-Todd

Originally posted by Rocket Guy 1317
I know this guy that has a Concept 98 and he can't fit the 98mm motors in there because the BT are .004 of an inch to small.

Click to expand...

Concept 97.8184......

Originally posted by cturner
Is it an Aerotech 98mm motor ?
or was it an EX Motor?

I do have 1 mandrel that is slightly smaller, i have since pulled it from use.

Have your friend give me a call and maybe i can work with him.
or let me know who it is and i can make a call.

Thanks
Curtis Turner
Performance Rocketry
814-536-8491
[email protected]
www.performancerocketry.com

Click to expand...

It was a 3 graim Wimpy Red EX motor in a Purple Stuff EX motor casing.