- Joined
- Mar 27, 2013
- Messages
- 22,537
- Reaction score
- 14,953
I've been delayed in finishing my Estes Mega-Mosquito because the fins didn't fit my old fin guide tool. Then in my L1 build, I used the same tool, but somehow ended up with my fins being askew (the tips lean 1/16" off of perpendicular to the BT ) . That's it... I'm done with it.
I'm sure that many of the people here are familiar with payloadbay.com, and some of the cool tools it has on it. Now I'm thinking that we can share our fin guide templates from it here (just in case it goes down sometime).
With that, here's what I'm starting with:
Estes Mega-Mosquito fin guide:
View attachment Mega-Mosquito fin guide.pdf
BT-60 3fnc 1/8" thickness fin guide:
View attachment BT60 3fin eigth inch fin guide.pdf
BT-60 4fnc 1/8" thickness fin guide:
View attachment BT60 4fin eigth inch fin guide.pdf
Binder Design 4" BT 3fnc 1/8" thickness fin guide:
View attachment Binder Design 4in tube 3fin eighth inch fin guide.pdf
I'm sure that many of the people here are familiar with payloadbay.com, and some of the cool tools it has on it. Now I'm thinking that we can share our fin guide templates from it here (just in case it goes down sometime).
With that, here's what I'm starting with:
Estes Mega-Mosquito fin guide:
View attachment Mega-Mosquito fin guide.pdf
BT-60 3fnc 1/8" thickness fin guide:
View attachment BT60 3fin eigth inch fin guide.pdf
BT-60 4fnc 1/8" thickness fin guide:
View attachment BT60 4fin eigth inch fin guide.pdf
Binder Design 4" BT 3fnc 1/8" thickness fin guide:
View attachment Binder Design 4in tube 3fin eighth inch fin guide.pdf
Last edited: