This stuff does an amazing job. And it holds up really really well to being dragged across the playa after landing. Just make sure to use a respirator when you're using it, it contains cyanide. This is what I plan on using on my Mongoose.
https://www.amazon.com/dp/B0043B7UQY/?tag=skimlinks_replacement-20
Here it is on one of the translucent Wildman FG tubes. It looks like a big piece of candy, the picture really doesn't do it justice.
Do you prep the surface first with fine sandpaper before shooting the clearcoat? Only way I've ever gotten the glass appearance with a rattle can is several layers of clear and doing a final wet sanding with progressively finer paper. Like starting with 1000
and working down to 2000 and even finer. All the while taking care not to take off all the clearcoat. Then use rubbing compound followed by polishing compound and then a good carwax.
Just shooting clear on the colored glass would save on the prep, primer and color coat steps. I like it. Kurt