There is now one thread consolidating the mini and full sized options here: https://www.rocketryforum.com/showthread.php?142710-EggFinder-and-EggFinder-Mini-Sleds-and-All-Thread-Free-Mounts
Some of you may have been following along with my development of a NC and shockcord mounting solution for the Eggfinder mini. Well, I finally got it where it needs to be to offer a limited run of these for sale. I want to emphasize that this is a limited run. I'm not trying to end run the vendor rules as I am really still up in the air on the idea, but I'm doing a "vendor beta test" that I have discussed with one of the mods beforehand. I also do not plan to directly compete in any existing niches like those occupied by Additive Aerospace.
A full description of development and use can be found here: https://www.rocketryforum.com/showthread.php?140774-EggFinder-Mini-3D-Printed-Sled-38mm-NC-and-Shockcord-Mounts-Available-for-Order
1) The Shockcord Mount: Contains - (1) Sled, (1) Outer Shell and (5) 4-40 screws - Price $21
2) Nose Cone Mount: Contains - (1) Sled, (1) Bulkhead, (1) Drill Alignment Guide and (5) M4 set screws - Price $20
Fits Wildman/CTI Injected molded cones and Madcow/RW filament wound NCs.
3) The Works: Includes - (1) Sled, (1) Outer Shell, (1) Bulkhead, (1) Drill Guide, (5) 4-40 screws and (5) M4 Set Screws - Price $30
4) Just The Sled - Price: $15
Sled fits in a 29mm body tube (not coupler tube).
If you would like something PM me what you would like (include your PayPal email address), and I will invoice you via PayPal when your item is ready to go. That way you have all the PayPal protection, and I'm not taking money for something I don't have in hand...we've seen that go wrong around here before.
Shipping will be standard USPS for $4 CONUS on up to 4 units.
I expect that invoices will go out over the holiday weekend and shipment will begin on the 5th, but again I will not invoice until your order is ready to go.
Some of you may have been following along with my development of a NC and shockcord mounting solution for the Eggfinder mini. Well, I finally got it where it needs to be to offer a limited run of these for sale. I want to emphasize that this is a limited run. I'm not trying to end run the vendor rules as I am really still up in the air on the idea, but I'm doing a "vendor beta test" that I have discussed with one of the mods beforehand. I also do not plan to directly compete in any existing niches like those occupied by Additive Aerospace.
A full description of development and use can be found here: https://www.rocketryforum.com/showthread.php?140774-EggFinder-Mini-3D-Printed-Sled-38mm-NC-and-Shockcord-Mounts-Available-for-Order
1) The Shockcord Mount: Contains - (1) Sled, (1) Outer Shell and (5) 4-40 screws - Price $21
2) Nose Cone Mount: Contains - (1) Sled, (1) Bulkhead, (1) Drill Alignment Guide and (5) M4 set screws - Price $20
Fits Wildman/CTI Injected molded cones and Madcow/RW filament wound NCs.
3) The Works: Includes - (1) Sled, (1) Outer Shell, (1) Bulkhead, (1) Drill Guide, (5) 4-40 screws and (5) M4 Set Screws - Price $30
4) Just The Sled - Price: $15
Sled fits in a 29mm body tube (not coupler tube).
If you would like something PM me what you would like (include your PayPal email address), and I will invoice you via PayPal when your item is ready to go. That way you have all the PayPal protection, and I'm not taking money for something I don't have in hand...we've seen that go wrong around here before.
Shipping will be standard USPS for $4 CONUS on up to 4 units.
I expect that invoices will go out over the holiday weekend and shipment will begin on the 5th, but again I will not invoice until your order is ready to go.
Last edited: