chris m
Well-Known Member
- Joined
- May 24, 2013
- Messages
- 1,834
- Reaction score
- 5
I have a colossus goblin I'm starting to build if you want a build thread I can do that .
Spec 4 inch air frame loc and cone
Four 1/4 inch fins was set to apply to frame will do though the wall
54mm hole . Only thing I am changing is the fins through the wall and the motor mount .
Things working on now is will the fins need to be re cut due to not just going on the air frame , losing about an inch waiting to sim this . And DD this being 46 inchs tall 4 grain cti would be the max length
Spec 4 inch air frame loc and cone
Four 1/4 inch fins was set to apply to frame will do though the wall
54mm hole . Only thing I am changing is the fins through the wall and the motor mount .
Things working on now is will the fins need to be re cut due to not just going on the air frame , losing about an inch waiting to sim this . And DD this being 46 inchs tall 4 grain cti would be the max length