fyrfytr310
Well-Known Member
- Joined
- Jul 6, 2006
- Messages
- 1,115
- Reaction score
- 1
Work has been a challenge lately and I will be out of town all next week. Suffering in Ft Myers, FL so please feel bad for me.
I had to make some progress or I wouldn't feel right.
The nose had a small hole so I decided to do a little foam work.
On my TAPs advice, I decided to paint a thin layer of epoxy on the av-bay shoulder. As I was prepping to do this I noticed a slight separation between the airframe and the coupler that needed to be filled. As I was filling with epoxy, I recalled that my TAP recommended I remove the ovality of the airframe by wrapping the coupler with tape prior to insertion. Naturally, I forgot this when I epoxied everything... Here we sit.
I had to make some progress or I wouldn't feel right.
The nose had a small hole so I decided to do a little foam work.
On my TAPs advice, I decided to paint a thin layer of epoxy on the av-bay shoulder. As I was prepping to do this I noticed a slight separation between the airframe and the coupler that needed to be filled. As I was filling with epoxy, I recalled that my TAP recommended I remove the ovality of the airframe by wrapping the coupler with tape prior to insertion. Naturally, I forgot this when I epoxied everything... Here we sit.