qquake2k
Captain Low-N-Slow
- Joined
- Jan 26, 2010
- Messages
- 13,574
- Reaction score
- 65
I started my first HPR scratch build today, that I'm calling "Tank Girl". (Thanks to El Cheapo for the name suggestion.) Tank Girl will be 4" diameter transitioning to 3", and either 82" or 92" long (depending on whether I decide to use the payload section or not). I started by cutting out the centering rings, from 1/4" plywood. I don't have a hole saw big enough, so I cut them out on the bandsaw, then drilled 1/4" holes through the centers. I mounted them on the lathe and cut them to final size, using a 4" payload section to check the size.