rocketgeek101
Well-Known Member
I'm currently in the process of designing a 54mm minimum diameter rocket. To date I've never flown anything high enough to lose sight of it, but this project will change that. If I'm going to go ahead with this project I'll need a tracker.
Requirements:
-Has to fit into a 54mm filament wound nose cone leaving enough room for a DD altimeter such as the RRC2+ or StratologgerCF.
-No HAM or other licence required.
-Not too expensive (I found this one: https://www.bigredbee.com/brb900.htm but at over $300 US it will cost more then the rest of the rocket combined!)
-Range should extend far enough for flights slightly over 20,000 feet (predicted max altitude for the rocket).
Thanks!
Requirements:
-Has to fit into a 54mm filament wound nose cone leaving enough room for a DD altimeter such as the RRC2+ or StratologgerCF.
-No HAM or other licence required.
-Not too expensive (I found this one: https://www.bigredbee.com/brb900.htm but at over $300 US it will cost more then the rest of the rocket combined!)
-Range should extend far enough for flights slightly over 20,000 feet (predicted max altitude for the rocket).
Thanks!
Last edited: