flying_silverad
Well-Known Member
- Joined
- Jul 23, 2002
- Messages
- 3,168
- Reaction score
- 5
While building the new "Smoke and Fire" I have run into an issue I hope someone can help me with. This is a 3 engine cluster rocket that I need to channel ejection gases through a 3/4" hole inside a Balsa TA6080, about ten inchs away, in a Bt80 tube. Question:
1.) Is the hole through the transition large enough to handle that amount of gas.
2.) And, will the inside wall of the bored out transition smolder/burn even though it's 10 inches away from the motor? (Thinking about coating inside with glue.)
See pics for ref.
BT80, TA8060, Respective tubes and motor mount.
Triple Cluster Engine Mount
1.) Is the hole through the transition large enough to handle that amount of gas.
2.) And, will the inside wall of the bored out transition smolder/burn even though it's 10 inches away from the motor? (Thinking about coating inside with glue.)
See pics for ref.
BT80, TA8060, Respective tubes and motor mount.
Triple Cluster Engine Mount