• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Wanted: Estes Scion

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have a set of fins, if you want to scratch build the rest.
With that set of fins, a Big Daddy nose cone, and a piece of T300 airframe tube (you need 32" of the 34" piece iirc) from as well as two CR52H300-W centering rings, and a short piece of T52H from Balsa Machining Service, you have what you need to clone a Leviathan or a Scion.
Nice but not necessary are an Estes or Aeropack motor retainer, 29mm motor block (limits motor length though).
 
Last edited:
I have a set of fins, if you want to scratch build the rest.

I'll defer to Otimebomb... but if he doesn't want them... I'll take 'em. I even have a US address they can be sent to (eRockets in Dayton, Ohio).
 
Back
Top